Description
Price: $19.99
(as of Dec 12, 2024 06:09:53 UTC – Details)
Product Description
Clear LED Display
Convenient to read the current temperature value clearly even if you stand far away from the thermostat.
More Stable and Efficient
CAVACHEW reptile dimming thermostat uses PID technology to accurately control the output power of the device to control the temperature, more stable and efficient, reducing the impact of sudden temperature changes on reptiles.
Standard Interface
Suit for connecting devices such as heat bulbs, heating pads and other heaters.
High Sensitivity Probes
1. Sensitively detect the real-time temperature of reptile habitat and make adjustments.
2. The probe is waterproof, also can be placed in water.
3. Powerful suction cup is convenient for fixing the probe in the terrarium.
Temperature Warning Display
1. This reptile rhermostat will display “LL” when the temperature is below 0 degrees and display “HH” when the temperature is above 60 degrees.
2. Please refer to the manual to use.
Long Power Cord
1. Convenient connection of heating bulbs and heating mats.
2. Please read all safety information before use.
Attention: this Reptile Thermostatcan not load sunlamp, LED light and energy-saving lamps.
Note:
1. In setting mode, the temperature setting value cannot exceed the control range. Otherwise, it will be invalid when you pressing the ↑ or ↓ button.
2. In working mode, press the ↑ or ↓ button to query the temperature set value. At this time, the setting value and the temperature unit will flash slowly for 3 times and then exit query status.
3. In working mode, if environment temperature is less than the temperature setting value for 3 degrees and no press on buttons, the temperature value will flash continuously to alarm that the current environment temperature is too low.
4. When the temperature sensor is short-circuited or open loop, the product will enter the sensor fault mode and cancel all actions. At the same time, the LED digital tube will display ”–”. After the fault is solved, the product will return to normal working state.
5. It will display “LL” when the temperature is below 0 degrees and display “HH” when the temperature is above 60 degrees.
6. Don’t immerse controller or probe into water.
Operating Instructions:
1. First connect the product to power supply and connect the heating device to the power socket. Then turn on the switch of the heating device.
2. Place the temperature probe to the area that need monitoring.
3. Set the temperature parameters on the control box.
3.1 Before setting, confirm whether the temperature unit is applicable. If not, press both ↑ and button ↓ for 2 seconds to change temperature unit to Fahrenheit or Celsius.
3.2 In working mode, long press the SET button for 3 seconds, and the last digit of the temperature value will flash. At this time, it means the product enter setting mode. Press the ↑ or ↓ button to increase or decrease the temperature setting value.
3.3 After set the temperature value, press SET button again to exit the setting mode. Or it will exit setting mode automatically and enter the working mode after no operation for 15 seconds.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
3.4 out of 5 stars
69
4.6 out of 5 stars
98
4.0 out of 5 stars
75
4.8 out of 5 stars
157
4.3 out of 5 stars
50
4.2 out of 5 stars
40
Price
— $39.99$39.99 $28.99$28.99 $22.99$22.99 $32.98$32.98 $210.99$210.99
Fit for Reptiles
Bearded Dragon, Gecko, Lizard, Snake etc. Bearded Dragon, Gecko, Lizard, Snake etc. Bearded Dragon, Gecko, Lizard, Snake etc. Bearded Dragon, Gecko, Lizard, Snake etc. Bearded Dragon, Gecko, Lizard, Snake etc. Bearded Dragon, Gecko, Lizard, Snake etc.
Efficient & Reliable Temperature Controller: CAVACHEW dimming reptile thermostat adopting advanced smart PID heating mode which can improve bulb lifetime, and equipped with high sensitivity probes which sensitively detect the real-time temperature and make adjustments. Constant temperature control range is from 20℃ to 50℃ (68°F to 122°F).
Unique Thermostat for Reptiles: CAVACHEW digital thermostat has a memory function, which can restore the previous settings after turning on the power, no more worrying about not setting the temperature control range in time to harm your beloved reptiles after powering up.
Multiple Usage: This reptile thermostat can be used for temperature control of heat lamps, heat bulb, heat mat, etc. Highly recommend use for bearded dragon, gecko, lizard, snake, frogs and other reptiles & amphibian. Maximum output load(300W), input voltage(110v-240v).
Easy to Use: Simply put in the temperature prob in the location that requires monitoring, set the appropriate temperature and then connect the heating device. LED digital screen can directly display ambient temperature and setting value(Supports °C/°F display).
For Reptiles Health: Temp controller is the key to the healthy growth of reptiles, so we need to control the temperature of the reptile habitat through the thermostat, provides comfortable temperature to ensure their health and vitality.
Satisfaction Guaranteed: CAVACHEW digital thermostat has accurate temp controller, can extend the service life of heat lamps and other heaters, save money and energy, please contact us for any questions or needs, and we will reply within 24 hours.
Reviews
There are no reviews yet.